New production hall in Czech Republic
Produktionshalle Tschechien

Our third production hall for heat exchangers was completed at the end of November 2018 (Putim, Czech Republic)!

Read More
ASME-Code Cooler

Universal Hydraulik GmbH has been developing ASME coolers for more than a year now on the basis of the hybrid coolers.

Read More
24/4 - 28/4/2017
Hannover exhibition, Germany in April 2017

Thank you very much for visiting us at the Hannover Messe 2017 and your interest in our products.

Read More
March 2017
Las Vegas IFPE/Conexpo in March 2017
Universal Hydraulik Las Vegas 2017

Thank you very much for visiting us at the IFPE/Conexpo 2017 in Las Vegas and your interest in our products.

Read More
Failsafe coolers match to Predictive Maintenance 4.0 !

Universal Hydraulik GmbH produce since decades Failsafe heat exchangers, which are suitable for Industry 4.0, because of 100% electronic monitoring.

Read More
Hybrid Cooler series up to 5.000 kW
Universal Hydraulik Baureihen Hybrid-Kühler

Universal Hydraulik GmbH expanded the hybrid cooler series by the next size: SCM-4000 (DN500).
Thus, the success model now covers a spectrum of 2 kW up to 5,000 kW cooling capacity with 8 sizes !!

Read More
Predictive Maintenance 4.0 Cooling-heating system
Universal Hydraulik Universal Kühl-Heizanlage

Universal Hydraulik GmbH introduces a cooling-heating system, which is equipped with an electronic control unit (Siemens S7-1500).

Read More
TFS/A – series extended to 32 kW
Universal Hydraulik TFS/A – Serie

Universal Hydraulik GmbH is expanding its oil-air cooler-pump series by a size of up to 32 kW cooling capacity at an oil flow of 80 l/min.

Read More
Special solutions: High pressure cooler (500bar)
Universal Hydraulik Hochdruckkühler (500bar)

Universal Hydraulik GmbH can now offer coolers for very high pressures up to 500 bar. The coolers are completely welded (also the tube side) and are suitable for fluids and gases.

Read More
Frequency control for Hydraulic units:
Universal Hydraulik Frequenzregelung bei Hydraulikaggregaten

Example of a hydraulic unit for a machine tool.
The constant-pump is controlled by a frequency converter, which depends on a pressure sensor.
The aim is to reduce power loss and noise emission.

Read More

Contact - Poduction/Sales

Universal Hydraulik GmbH

Street: Siemensstr.33

City: 61267 Neu-Anspach
Country: Germany

Phone: +49(0)6081-94180

E-mail: info@universalhydraulik.com

Web: www.universalhydraulik.de

Contact - Poduction/Sales

Universal Hydraulik USA Corp.

Fort Meigs Business Center

Street: 25651 Fort Meigs Rd., Ste. A,

City: Perrysburg, OH 43551
Country: USA

Phone: +1 419 873 63 40

E-mail: info@universalhydraulik.com

Web: www.universalhydraulik-usa.com

Contact - Poduction

Universal Hydraulik CZ s.r.o.

Street: Putim 227

City: 39701 Pisek
Country: Czech Republic

E-mail: info@universalhydraulik.com

Web: www.universalhydraulik.com